4-157-000-12(1)
USB Media
Player
Operating Instructions
SMP-U10
© 2009 Sony Corporation
from the wall outlet. This will
prevent damage to the set due to
lightning and powerline surges.
OBTAINED FROM MPEG LA,
LLC. SEE
HTTP://WWW.MPEGLA.COM
Precautions
On cleaning
About this manual
On safety
Clean the cabinet and controls with
a soft cloth slightly moistened with
a mild detergent solution. Do not
use any type of abrasive pad,
scouring powder or solvent such as
alcohol or benzine.
• Instructions in this manual
describe the controls on the
remote. You can also use the
controls on the player if they
have the same or similar names
as those on the remote.
Should any solid object or liquid
fall into the cabinet, unplug the
player and have it checked by
qualified personnel before
operating it any further.
• NEED-to-know information (to
prevent incorrect operation) is
listed under the b icon. NICE-
to-know information (tips and
other useful information) is
listed under the z icon.
On power sources
On replacement of parts
In the event that this unit is
repaired, repaired parts may be
collected for reuse or recycling
purposes.
• If you are not going to use the
player for a long time, be sure to
disconnect the player from the
wall outlet. To disconnect the
AC power cord (mains lead),
grasp the plug itself; never pull
the cord.
Licensing and trademarks
• This player incorporates High-
Definition Multimedia Interface
(HDMI™) technology. HDMI,
the HDMI Logo and High-
Definition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC.
• Manufactured under license
from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the
double-D symbol are trademarks
of Dolby Laboratories.
• DivX, DivX Certified, and
associated logos are trademarks
of DivX, Inc. and are used under
license.
• MPEG Layer-3 audio coding
technology and patents licensed
from Fraunhofer IIS and
IMPORTANT NOTICE
Caution: This player is capable
of holding a still video image or
on-screen display image on your
television screen indefinitely. If
you leave the still video image or
on-screen display image
• Do not touch the mains lead or
the AC adaptor with wet hands.
Doing so may cause shock
hazard.
On placement
displayed on your TV for an
extended period of time you risk
permanent damage to your
television screen. Plasma display
panel televisions and projection
televisions are susceptible to
this.
• Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
• Do not place the player on a soft
surface such as a rug.
• Do not place the player in a
location near heat sources, or in a
place subject to direct sunlight,
excessive dust, or mechanical
shock.
• Do not install this equipment in a
confined space, such as a
bookshelf or similar unit.
If you have any questions or
problems concerning your player,
please consult your nearest Sony
dealer.
Thomson.
• THIS PRODUCT IS
On AC adaptor
LICENSED UNDER THE
MPEG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-
COMMERCIAL USE OF A
CONSUMERFORDECODING
VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL
STANDARD (“MPEG-4
VIDEO”) THAT WAS
ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL
AND NON-COMMERCIAL
ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO
PROVIDER LICENSED BY
MPEG LA TO PROVIDE
MPEG-4 VIDEO.
• Use the supplied AC adaptor for
this player, as other adaptors
may cause a malfunction.
• Do not disassemble or reverse-
engineer.
• Do not confine the AC adaptor in
a closed place such as a
bookshelf or an AV cabinet.
• Do not connect the AC power
adaptor to a traveler’s electric
transformer, which may generate
heat and cause a malfunction.
• Do not drop or apply shock.
On adjusting volume
Do not turn up the volume while
listening to a section with very low
level inputs or no audio signals. If
you do, the speakers may be
damaged when a peak level section
is played.
NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR
ANY OTHER USE.
ADDITIONAL
INFORMATION INCLUDING
THAT RELATING TO
PROMOTIONAL, INTERNAL
AND COMMERCIAL USES
AND LICENSING MAY BE
Lightning
For added protection for this set
during a lightning storm, or when it
is left unattended and unused for
long periods of time, unplug it
3
Table of Contents
Step 1: Connecting to Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
About the CONTROL FOR HDMI functions for ‘BRAVIA Sync’
‘BRAVIA Sync’ display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Step 5: Quick Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SCREEN SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CUSTOM SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setting the digital output signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
4
Turns on the player, or sets to standby
mode.
Guide to Parts and
Controls
VOL (volume) +/– (11)
Adjusts the TV volume.
For more information, see the pages indicated
in parentheses.
B Number buttons
Enters the track number, etc.
Remote
CLEAR (18)
Clears the entry field.
C TIME/TEXT
Displays the playing time.
If a music file has an ID3 tag, the
player will display the album name/
track title from the ID3 tag
information. This player supports ID3
versions 1.0/1.1 and 2.2/2.3.
AUDIO (
)
Changes the audio language or audio
channel.
SUBTITLE (
)
– Changes the subtitles when
subtitles are recorded on DivX
video files only.
– Displays lyrics for a music file
when pressed during playback. For
Selects the file type (video, photo, or
music) to be played.
The VOL (volume) +, number 5, AUDIO,
and N buttons have a tactile dot. Use the
tactile dot as a reference when operating the
player.
Displays the album list.
RETURN (14)
Returns to the previous display.
Displays the playback information.
Divides the screen into 16 subscreens
to display photo files as thumbnails.
Moves the highlight to select a
displayed item.
TV INPUT (input select) (11)
Switches between TV and other input
sources.
Enters the selected item.
Turns on the TV, or sets to standby
mode.
,continued
5
E ./> PREV/NEXT (previous/
next)
Skips to the previous/next track or file
in continuous play mode.
/
REPLAY/ADVANCE (replay/
advance/step)
– Replays the scene /briefly fast
forward the scene when pressed
*1
*1
during playback.
*2
– Plays forward one frame at a time
when pressed during pause mode.
– Changes the LUN (Logical Unit
Number) devices when pressed
during the list of albums or tracks is
m/M (scan/slow)
– Fast reverses/fast forwards when
pressed during playback. The speed
changes when pressed repeatedly.
*2
– Plays forward in slow motion
when pressed repeatedly during
pause mode.
N PLAY
Starts or re-starts playback.
X PAUSE
Pauses or re-starts playback.
x STOP
Stops playback.
ZOOM
Zooms the images.
1
2
*
*
For DivX video files only.
These functions may not work with some
scenes.
For video files only.
b
Some playback functions may not work with an
6
Front panel
VIDEO
PHOTO
MUSIC
Indicates the selected media type.
B
D
USB jack (type A) (14)
Connect a USB device to this jack.
Rear panel
O U T
O U T
C O M P O N E N T V I D E O
R P A U - L
R - O I
L I N E O U T
V I D E O
L A O U T D I G I T
A X I C A O L
H D M I
Y
B P
D
D C I N 6 V
A HDMI OUT (High-Definition
7
A
TV
Hookups and Settings
INPUT
AUDIO
VIDEO
When unpacking, check the supplied
R
L
b
(red)
(white) (yellow)
• Plug cables securely to prevent unwanted noise.
• Refer to the operating instructions supplied with
the components to be connected.
• Be sure to disconnect the mains lead of each
component before connecting.
Audio/video cable
(supplied)
Step 1: Connecting to
Your TV
(red)
(white)
(yellow)
Connect this player to your TV using a video
cable. Select one of the patterns A through
C, according to the input jack on your TV.
In order to view progressive signal (525p or
625p) pictures with a compatible TV, you
must use pattern B. Select pattern C when
connecting to a TV equipped with HDMI
input. Be sure to also make an audio
connection in the case of patterns A and B
(page 10).
to LINE OUT (VIDEO)
USB media
player
(green)
(blue)
(red)
to HDMI
OUT
to COMPONENT
VIDEO OUT
A Video input jack
You will enjoy standard quality images.
HDMI cord
(not supplied)
B Component video input jacks
(Y, PB/CB, PR/CR
)
You will enjoy accurate colour reproduction
and high quality images.
Component
video cable
(not supplied)
C HDMI/DVI input jack
Use a certified Sony HDMI cord (not
supplied) to enjoy high quality digital picture
and sound through the HDMI OUT jack.
(green)
(blue)
(red)
Y
PB/CB
PR/CR
COMPONENT VIDEO IN
HDMI IN
TV
TV
C
B
: Signal flow
8
b
When connecting to the HDMI OUT jack
Insert the HDMI connector straight into the
HDMI OUT jack.
Depending on the connected component, the
CONTROL FOR HDMI function may not work.
Refer to the operating instructions supplied with the
component.
Improper handling may damage the HDMI
OUT jack and the connector.
Make sure the connector is not upside down
or tilted.
‘BRAVIA Sync’ display
You can control the player by selecting the
SYNC MENU button on the TV’s remote or
TV’s option menu.
Some TVs may have other buttons available
to turn on the ‘BRAVIA Sync’ display, or
require setting on the TV. Depending on the
TV, the setting display may appear before the
‘BRAVIA Sync’ display. Refer also to the
operating instructions supplied with the TV.
Upside down
Not straight
To connect to a TV with DVI input
Use an HDMI-DVI converter cord (not
supplied). The DVI jack will not accept any
audio signals, so you have to use another
audio connection in addition to this
cannot connect the HDMI OUT jack to DVI
jacks that are not HDCP compliant (e.g., DVI
jacks on PC displays).
‘BRAVIA Sync’ display
When connecting to a standard 4:3 screen TV
Some images may not fit your TV screen. To
Displays “FILE LIST” and “PICT. NAVI”
(Picture Navigation).
Select an item using C/c and then press
ENTER.
b
• Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the
TV screen. If your TV has only one audio/video
input jack, connect the player to this jack.
• Be sure to disconnect the HDMI cord when
moving the player.
• If you place the player on a cabinet with the
HDMI cord connected, do not apply too much
pressure to the cabinet wall. It may damage the
HDMI OUT jack or the HDMI cord.
• When connecting or disconnecting, do not screw
in or rotate the HDMI connector.
To change the display
Press the SYNC MENU button on the TV’s
remote repeatedly to turn on or change the
display. ‘BRAVIA Sync’ display and Control
Menu are displayed alternately.
To turn off the display
Press the RETURN or SYNC MENU button
on the TV’s remote repeatedly.
z
You can also control these functions on the player’s
remote.
About the CONTROL FOR HDMI
functions for ‘BRAVIA Sync’ (for
HDMI connections only)
b
• The items in the ‘BRAVIA Sync’ display have the
same functions as the player’s remote buttons
(page 5).
• You can only use this function if your TV
supports ‘BRAVIA Sync.’
• For more details on ‘BRAVIA Sync,’ please refer
to the operating instructions supplied with the TV.
By connecting to Sony components that are
compatible with the CONTROL FOR HDMI
function with an HDMI cord (not supplied),
you can enjoy the following features:
• System-Power Off
When you turn the TV off by using the [/1
button on the TV’s remote, the components
compatible with CONTROL FOR HDMI
function turn off automatically.
9
* The yellow plug is used for video signals
Step 2: Connecting to
Your Audio Component
TV, projector, or
A
audio component
INPUT
Select one of the following patterns, A or B,
according to the input jack on your TV
monitor, projector, or audio component such
as an AV amplifier (receiver).
AUDIO
VIDEO
R
L
This will enable you to listen to sound.
(red)
(white)
(yellow)*
A Audio L/R input jacks
This connection will use your TV’s or audio
component’s two speakers for sound.
Audio/video
cable (supplied)
B Digital audio input jack
If your audio component has a Dolby Digital
or MPEG audio decoder and a digital input
jack, use this connection. You can enjoy
Dolby Digital (5.1ch) and MPEG audio
(5.1ch) surround effect.
If you connect to a Sony audio component
that is compatible with the CONTROL FOR
HDMI function, refer to the operating
instructions supplied with the audio
component.
(red)
(white)
(yellow)*
USB media
player
to LINE OUT
(L-AUDIO-R)
to DIGITAL OUT
(COAXIAL) or HDMI OUT
b
• After you have completed the connection, make
If your audio component has an MPEG audio
decoder function, set “MPEG” to “MPEG” in
sound or a loud noise will come from your
speakers.
• When you connect the player to an audio
component using an HDMI cord, you will need to
do one of the following:
Coaxial
digital cord
(not supplied)
or
HDMI cord
(not supplied)
– Connect the audio component to the TV with
the HDMI cord.
– Connect the player to the TV with a video cord
other than HDMI cord (component video cord
or audio/video cord).
to coaxial/
HDMI digital
• When connecting to the HDMI OUT jack,
carefully align the HDMI connector with the jack.
Do not bend or apply force to the HDMI cord.
input
DIGITAL IN
(COAXIAL)
HDMI IN
Audio component
with a decoder
B
: Signal flow
z
For correct speaker location, see the operating
instructions supplied with the connected
components.
10
Step 3: Connecting the
AC Adaptor
Step 4: Preparing the
Remote
Connect the supplied AC adaptor to the DC
IN 6V jack of the player.
Insert two R6 (size AA) batteries by matching
the 3 and # ends on the batteries to the
markings inside the compartment. When
using the remote, point it at the remote sensor
on the player.
D C I N 6 V
DC plug
Connect the AC
adaptor to mains
b
b
Stop playback before disconnecting the mains lead.
• Do not leave the remote in an extremely hot or
humid place.
Failure to do so may cause a malfunction.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
• If you do not use the remote for an extended
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.
Controlling TVs with the remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
Available buttons
Depending on the connected unit, you may
not be able to control your TV using some or
all of the buttons on the supplied remote.
Buttons
Operations
TV [/1
Turn the TV on or off
VOL (volume)
+/–
Adjust the volume of the
TV
TV INPUT
(input select)
Switch the TV’s input
source between the TV and
other input sources
,continued
11
To control other TVs with the remote
You can control the volume, input source, and
power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
Step 5: Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
player.
To skip an adjustment, press >. To return
to the previous adjustment, press ..
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
1
2
Turn on the TV, then press [/1.
1
While holding down TV [/1, press the
number buttons to select your TV’s
manufacturer’s code.
Switch the input selector on your
TV so that the signal from the
player appears on your TV screen.
2
Release TV [/1.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Manufacturer Code number
Sony
01 (default)
3
4
Press ENTER without connecting a
USB device.
Hitachi
LG/Goldstar
Panasonic
Philips
24
76
The Language Setup Display appears.
17, 49
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
06, 08, 72
RCA
77
71
29
38
Samsung
Sharp
5
6
Press ENTER.
The Screen Setup Display appears.
Toshiba
Press X/xto select the setting that
matches your TV type.
Select “16:9” or “4:3 LETTER BOX”
7
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component appears.
12
8
9
Press X/xto select the type of jack
(if any) you are using to connect to
an audio component, then press
ENTER.
Select “NO” if you do not connect an
audio component, then go to step 10.
Select “YES: LINE OUTPUT L/R
(AUDIO)” if you connect an audio
component using an audio cable, then go
to step 10.
Select “YES: DIGITAL OUTPUT” if
you connect an audio component using a
digital coaxial cable/HDMI cord.
Press X/x to select the type of
Dolby Digital signal to your audio
component.
If your audio component has a Dolby
Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
10Press ENTER.
Quick Setup is finished and connections
are complete.
If your audio component has an MPEG
audio decoder, set “MPEG” to “MPEG”
b
the selection for “TV TYPE” is skipped.
13
The list of albums appears.
4
5
Press X/x to select an album.
Playback
Press N.
Playback starts from the selected album.
Adjust the volume on the TV or the audio
component.
To select a specific video or music file,
press ENTER and press X/x to select a
track or file, and then press ENTER.
To select a specific photo file, see
Playing Files
Before connecting a USB device to the
player, check the USB devices and file types
playable on the player.
Refer to “Playable USB Devices”
(supplement) and also the operating
instructions supplied with the USB device.
For details on playable files, see “Notes
To stop playback
Press x.
1
2
Switch the input selector on your
TV so that the signal from the
player appears on your TV screen.
To pause playback
Press X.
To go to the next or previous page
Press c or C.
Connect a USB device to the USB
jack.
To return to the previous display
Press RETURN.
VIDEO
PHOTO
MUSIC
To go to the next or previous music/video
file
Press > or . during playback.
Note that you cannot return to the previous
album by using ., and that you need to
select the previous album from the album list.
USB device
To remove the USB device
Stop playback and disconnect the USB device
from the USB jack.
Depending on the device, an album list
may appear on the TV screen.
z
• By setting “MEDIA” to “PHOTO (MUSIC),” you
can view a slideshow with sound when the music
and photo files are placed in the same album.
• Depending on the contents, the player will play all
files regardless of the “MEDIA” settings.
• You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
“AUTO POWER OFF” in “CUSTOM SETUP”
3
Press MEDIA SELECT repeatedly
to select “VIDEO,” “PHOTO
(MUSIC),” “PHOTO (BGM),” or
“MUSIC,” then press ENTER.
VIDEO
PHOTO(MUSIC)
PHOTO(BGM)
MUSIC
b
• Take the precaution of backing up important files
on the USB device before connecting it to the
player.
14
• Do not forcibly connect the USB device and make
sure the plug is oriented correctly.
• Do not connect the player and the USB device
through a USB hub.
• Make sure no virus-infected files are contained on
a USB device before use.
Selecting a photo file
1 Press FILE LIST.
The list of albums appears.
• This player supports USB Mass Storage Class
only.
• This player supports USB devices of FAT12,
FAT16, or FAT32 format only.
• Some USB devices may not work with this player.
• For some device, LUN (Logical Unit Number)
may appear. To change the LUN or original
2 Press X/x to select an album, then
press PICTURE NAVI.
The image files in the album appear in 16
subscreens. A scroll box is displayed on
the right.
storage, press
tracks is displayed.
when the list of albums or
1
2
3
4
• If the number of viewing times is preset, you can
play DivX video files as many times as the preset
number. The following occurrences are counted:
– when another file is played.
– when the player is turned off. This includes
when the player is automatically turned off by
the Auto Power Off function. Press X instead of
x to stop viewing.
5
6
7
8
9
10
14
11
15
12
16
13
To display additional images, select a
bottom image and press x. To return to a
previous image, select a top image and
press X.
– when the USB device is removed.
– when the “MEDIA” settings are changed.
To play music with lyrics
Press SUBTITLE while playing music files
that contain unsynchronized lyric
information. To display the next/previous
line, press X/x.
3 PressC/X/x/cto select the image you
want to view, and press ENTER.
The selected image appears.
z
To go to the next or previous photo file
Press C or c during playback.
Set “MEDIA” to “MUSIC” to enable lyrics
function.
Note that you cannot return to the previous
album by using C. Select the previous album
from the album list.
b
The player supports MP3 ID3 Lyrics only.
One-Touch Play (for HDMI connections
only)
To rotate a photo image
Press X/x while viewing the image. Each
time you press X, the image rotates
counterclockwise by 90 degrees.
To return to normal view, press CLEAR.
Note that the view also returns to normal if
you press C/c to go to the next or previous
image.
With one touch of the N button on the
remote, the player and your TV automatically
turn on and the TV’s input is switched to the
player. Playback starts automatically.
The TV’s input will also switch to the player
automatically in the following cases:
– You press the N, FILE LIST or DISPLAY
button on the remote.
Note that these buttons are not effective
when you play music files in “MUSIC”
mode.
,continued
15
b
To display photo information
Press SUBTITLE while viewing photo files.
The detailed information for the selected
photo file appears.
• By connecting to a Sony “PhotoTV HD”
compatible device using an HDMI cord, the TV
will set the optimal image quality for viewing still
pictures automatically. For more details, refer to
the operating instructions supplied with the TV.
• “PhotoTV HD” is activated when “JPEG
RESOLUTION” is set to “PhotoTV HD,” photo
playback is available, and the player is connected
to a TV by an HDMI cord.
is displayed when the picture was taken
using flash.
is displayed when the image is
automatically rotated.
To hide the information, press SUBTITLE.
Note that the above information may not
appear depending on the digital camera.
• You cannot select “CUSTOM PICTURE MODE”
or “SHARPNESS” when “PhotoTV HD” mode is
activated.
• When “PhotoTV HD” mode is activated, the
player changes the video signal output setting in
“HDMI RESOLUTION” to “1920×1080i,” “TV
TYPE” to “16:9,” and “YCBCR/RGB (HDMI)” to
“YCBCR” automatically, although the current
settings are kept.
To stop viewing the photo
Press x.
b
PICTURE NAVI does not work if “MUSIC” or
• You cannot select “HDMI RESOLUTION” or
“YCBCR/RGB (HDMI)” in “HDMI SETUP”
activated.
• If you set “PhotoTV HD” mode, the effect,
rotation and zoom functions are not available.
• When “PhotoTV HD” mode is activated, the
selection for “TV TYPE” is skipped during Quick
Viewing a high quality slide
show (PhotoTV HD)
If you have a Sony TV that is compatible with
“PhotoTV HD,” you can enjoy the best
quality images by the following connection
and setting.
1 Connect the player to the TV using an
HDMI cord (not supplied).
Setting the pace for a
slide show (INTERVAL)
2 Set the TV’s video setting to “Video-A”
You can set the time the slides are displayed.
mode.
For details about “Video-A,” refer to the
operating instructions supplied with the
TV.
1 After selecting
(INTERVAL) on
x to select a setting.
The default setting is underlined.
• NORMAL: sets to standard duration
• FAST: sets a duration shorter than
NORMAL
3 Set “JPEG RESOLUTION” to “PhotoTV
• SLOW 1: sets a duration longer than
NORMAL
• SLOW 2: sets a duration longer than
SLOW 1
On “PhotoTV HD”
“PhotoTV HD” allows for highly-detailed
pictures, and photo-like expression of subtle
textures and colours. By connecting Sony
“PhotoTV HD” compatible devices using an
HDMI cord, a whole new world of photos can
be enjoyed in breathtaking Full HD quality.
For instance, the delicate texture of human
skin, flowers, sand, and waves can now be
displayed on a large screen in beautiful photo-
like quality.
2 Press ENTER.
b
Duration of interval depends on the “JPEG
RESOLUTION” setting in “HDMI SETUP”
16
Selecting the slides’
appearance (EFFECT)
You can select the way the slides are
displayed during a slide show.
(
(
)
)
1
1
15
4
USB
0 : 00 : 02
OFF
OFF
USB
1 After selecting
(EFFECT) on
x to select a setting.
ALBUM
FILE
The default setting is underlined.
• MODE 1: the images randomly cycle
through the effects
REPEAT
ENTER
DISPLAY
Quit:
• MODE 2: the next image sweeps in
from top left to bottom right
• MODE 3: the image sweeps in from top
to bottom
A Control Menu items
• MODE 4: the image sweeps in from left
to right
• MODE 5: the image stretches out from
the centre of the screen
B Currently playing album number/Total
number of albums
C Currently playing file number/Total
number of files
• OFF: turns off this function
D Playing time*
2 Press ENTER.
E Selected media type
F Playback status
b
• Note that this setting does not work if the JPEG
file has rotation information.
• Depending on the “JPEG RESOLUTION” setting
G Selected item icon/menu options
H Operation message
I Function name of selected Control
Menu item
Control Menu display
* Displays the date of photo files.
Use the Control Menu to select a function and
to view related information. Press DISPLAY
repeatedly to turn on or change the Control
Menu display as follows:
, Control Menu display 1
m
Control Menu display 2 (Except when
“MEDIA” is set to “MUSIC”)
m
Control Menu display off
Control Menu display 1 and 2 will show
different items depending on the media type.
Example: Control Menu display 1 when
playing a video file.
Press X/x to select the Control Menu item,
then press ENTER.
For details about the item, see “List of
,continued
17
MEDIA
List of Control Menu items
Selects a media type to be played.
VIDEO: plays video files.
PHOTO (MUSIC): plays photo and
music files as a slide show.
PHOTO (BGM): plays photo files
with the player’s internal
Item
Item Name, Function
ALBUM
Selects the album that contains the
video file to be played.
background sound. To choose the
melody of the background sound,
press AUDIO repeatedly while
viewing the image.
FILE
Selects the video file to be played.
ALBUM
Selects the album that contains
music or photo files to be played.
MUSIC: plays music files.
b
FILE
• Depending on the contents, the
player will play all files regardless of
the “MEDIA” settings.
Selects the photo file to be played.
TRACK
Selects the track to be played.
To search for an album, file or track
REPEAT
Selects the item to be repeated when
pressed repeatedly.
USB: repeats all albums.
TRACK: repeats the current music
track.
1
Select “ALBUM,” “FILE,” or
“TRACK” from the Control Menu.
2
Press X/x to select the search method.
“** (**)” is selected (** refers to a
number).
FILE: repeats the current video file.
ALBUM: repeats the current album.
To return to normal play, press
CLEAR or select “OFF.”
3
4
5
Press ENTER.
“** (**)” changes to “-- (**).”
Press the number buttons to select the
number you want to search.
QUICK:
Use Quick Setup to choose the
desired language of the on-screen
display, the aspect ratio of the TV
and the audio output signal.
Press ENTER.
TIME/TEXT
Checks the elapsed time.
Input the time code for picture and
music searching (DivX video files
only).
CUSTOM:
In addition to the Quick Setup
setting, you can adjust various other
settings.
1
2
Press ENTER.
RESET:
Input the time code using the
number buttons, then press
ENTER.
Returns the settings in “SETUP” to
the default setting.
For example, to find a scene at 2
hours, 10 minutes, and 20
seconds after the beginning, just
enter “2:10:20.”
ZOOM
Magnifies the image up to four times
the original size, and scroll using C/
X/x/c.
To return to normal view, press
CLEAR.
DATE
Displays the date the picture was
taken by a digital camera.
This function is available for all
pictures except a background image.
Specifies the duration the slides are
displayed.
18
EFFECT (page 17)
Selects the effects to be used for
changing slides during a slide show.
Customizing the
Playback Configuration
CUSTOM PICTURE MODE
Selects the picture quality that best
suits the programme you are
watching.
Adjusting the playback
picture (CUSTOM PICTURE MODE)
SHARPNESS (page 20)
Exaggerates the outline of the image
to produce a sharper picture.
You can adjust the video signal from the
player to obtain the picture quality you want.
1 After selecting
(CUSTOM
AV SYNC (page 20)
Adjusts the delay between the
picture and sound.
PICTURE MODE) on the Control Menu
setting you want.
z
The Control Menu icon indicator lights up in green
The default setting is underlined.
• STANDARD: displays a standard
picture
• DYNAMIC 1: produces a bold
dynamic picture by increasing the
picture contrast and the colour intensity
• DYNAMIC 2: produces a more
dynamic picture than DYNAMIC 1 by
further increasing the picture contrast
and colour intensity
t
when you select any item
except “OFF” (“REPEAT,” “SHARPNESS,”
“ZOOM” only). The “CUSTOM PICTURE
MODE” indicator lights up in green when any
setting other than “STANDARD” is selected. The
“AV SYNC” indicator lights up in green when set
to more than 0 ms.
• CINEMA 1: enhances details in dark
areas by increasing the black level
• CINEMA 2: white colours become
brighter and black colours become
richer, and colour contrast is increased
• MEMORYt: adjusts the picture in
greater detail
PICTURE
Changes the contrast.
BRIGHTNESS Changes the overall
brightness.
COLOR
HUE
Makes colours deeper
or lighter.
Changes the colour
balance.
2 Press ENTER.
The selected setting takes effect.
z
When you watch a movie, “CINEMA 1” or
“CINEMA 2” is recommended.
,continued
19
b
2 Press c repeatedly to adjust the
delay.
• This function does not work when “PhotoTV HD”
• This function does not work if your TV supports
Theatre mode and it is set to “On.” For more
details, refer to the operating instructions supplied
with the TV.
Each time you press C/c, the delay is
adjusted by 10 milliseconds.
3 Press ENTER.
The selected setting takes effect.
Sharpening the picture
(SHARPNESS)
To reset the “AV SYNC” setting
Press CLEAR in step 2.
You can enhance the outlines of images to
produce a sharper picture.
b
• This function is not effective if you use the
DIGITAL OUT (COAXIAL) jack, and set
“DOLBY DIGITAL” or “MPEG” in “AUDIO
SETUP” to “DOLBY DIGITAL” or “MPEG”
• This function is not effective if you connect a
Dolby Digital-compliant device via the HDMI
OUT jack, and set “DOLBY DIGITAL” or
“MPEG” in “AUDIO SETUP” to “DOLBY
• This function works for video files only.
1 After selecting
(SHARPNESS)
X/x to select a level.
The default setting is underlined.
• OFF: cancels this option
• 1: enhances the outline
• 2: enhances the outline more than 1
2 Press ENTER.
The selected setting takes effect.
b
• This function does not work when “PhotoTV HD”
• This function does not work if your TV supports
Theatre mode and it is set to “On.” For more
details, refer to the operating instructions supplied
with the TV.
Adjusting the delay
between the picture and sound
(AV SYNC)
If the sound does not match the pictures, you
can adjust the delay between the picture and
sound.
1 After selecting
(AV SYNC) on
to select “SET t,” then press ENTER.
The “AV SYNC” adjustment bar
appears.
AV SYNC
0ms
20
LANGUAGE SETUP
Settings and Adjustments
You can set various languages for the on-
screen display.
Using the Setup Display
◆ OSD (On-Screen Display)
Switches the display language on the screen.
You can make various adjustments to items,
such as picture and sound.
For details on each Setup Display item, see
SCREEN SETUP
b
Playback settings stored in a file take priority over
the Setup Display settings, and not all of the
functions described may work.
Choose settings according to the TV to be
connected.
The default settings are underlined.
1
2
Press DISPLAY when the player is
in stop mode.
◆ TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
The Control Menu appears.
You cannot select this when “PhotoTV HD”
Press X/x to select
(SETUP), then press ENTER.
The options for “SETUP” appear.
• QUICK: makes the basic adjustments
• CUSTOM: makes various adjustments
• RESET: resets all the settings explained
16:9
Select this when connecting to a
wide-screen TV or a TV with a
wide mode function.
4:3
LETTER
BOX
Select this when connecting to a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
3
Press X/x to select “CUSTOM,”
then press ENTER.
The Setup Display appears.
Select the setup category and adjust each
item following the instructions on pages
◆ SCREEN SAVER
The screen saver image appears when the
player remains in pause or stop mode for 15
minutes, or when you play music files for
more than 15 minutes. The screen saver will
help prevent your display device from
becoming damaged (ghosting). Press N to
turn off the screen saver.
ON
Turns on the screen saver.
Turns off the screen saver.
OFF
◆ BACKGROUND
Selects the background colour or picture on
the TV screen when the player is in stop mode
or while playing music files.
GRAPHICS A preset picture stored in the
player appears.
BLUE
The background colour is blue.
BLACK
The background colour is
black.
,continued
21
◆ PROGRESSIVE (COMPONENT OUT
ONLY)
◆4:3 OUTPUT
This setting is effective only when you set
“TV TYPE” in “SCREEN SETUP” to
“16:9.” Adjust this to watch 4:3 aspect ratio.
If you can change the aspect ratio on your TV,
change the setting on your TV, not the player.
If your TV accepts progressive (525p/625p)
format signals, set “PROGRESSIVE
(COMPONENT OUT ONLY)” to “ON.”
Note that you must connect to a progressive
format TV using the COMPONENT VIDEO
FULL
Select this when you can
change the aspect ratio on your
TV.
OFF
ON
To output normal (interlace)
signals.
NORMAL
Select this if you cannot change
the aspect ratio on your TV.
Shows a 16:9 aspect ratio signal
with black bands on the left and
right of the image.
To output progressive signals.
To output progressive signals
1
Select “PROGRESSIVE
(COMPONENT OUT ONLY),” and
press ENTER.
2
3
Select “ON,” and press ENTER.
The display asks for confirmation.
Select “Start,” and press ENTER.
The video switches to a progressive
signal for 5 seconds.
4
If the picture appears normal, select
“YES,” and press ENTER.
If not, select “NO,” and press ENTER.
To reset the setting
If the picture does not appear normal or goes
blank, press [/1 to turn off the player, and
enter “369” using the number buttons on the
remote, then press [/1 to turn on the player
again.
◆ MODE (PROGRESSIVE)
In order for these images to appear natural on
your screen when output in progressive
mode, the progressive video signal needs to
be converted to match the type of software
that you are watching.
This setting is effective only when you set
“PROGRESSIVE (COMPONENT OUT
ONLY)” in “SCREEN SETUP” to “ON.”
AUTO
Automatically detects the
software type (film-based or
video-based) and selects the
appropriate conversion mode.
Normally, select this position.
VIDEO
Fixes the conversion mode to
the mode for video-based
software.
22
CUSTOM SETUP
AUDIO SETUP
Use this to set up playback related and other
settings.
The default settings are underlined.
You can set the sound according to the
playback and connection conditions.
The default settings are underlined.
◆ AUTO POWER OFF
◆ AUDIO DRC (Dynamic Range Control)
Makes the sound clear when the volume is
turned down when playing a video file that
conforms to “AUDIO DRC.”
This function affects the output from the
following jacks:
– LINE OUT (L-AUDIO-R) jacks.
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack only when “DOLBY DIGITAL” is set
Switches the Auto Power Off setting on or
off.
ON
The player enters standby mode
when left in stop mode for more
than 30 minutes.
OFF
Switches this function off.
◆ AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
STANDARD Normally, select this position.
TV MODE
Makes low sounds clear even if
you turn the volume down.
OFF
ON
Switches this function off.
WIDE
RANGE
Gives you the feeling of being
at a live performance.
Automatically starts playback
when the player is turned on by
a timer (not supplied).
◆ DOWNMIX
Switches the method for mixing down to 2
channels when you play a video file which
has rear sound elements (channels) or is
recorded in Dolby Digital format. This
function affects the output of the following
jacks:
– LINE OUT (L-AUDIO-R) jacks.
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack when “DOLBY DIGITAL” is set to
◆ PAUSE MODE
Selects the picture in pause mode.
AUTO
The picture, including subjects
that move dynamically, is
output with no jitter. Normally,
select this position.
FRAME
The picture, including subjects
that do not move dynamically,
is output in high resolution.
DOLBY
SUR-
ROUND
Normally, select this position.
Multi-channel audio signals are
output to 2 channels for enjoying
surround sounds.
◆ DivX
Displays the registration code for this player.
For more information, go to
NORMAL Multi-channel audio signals are
downmixed to 2 channels for use
with your stereo.
on the Internet.
,continued
23
◆ DIGITAL OUT
◆MPEG
Selects if audio signals are output via the
DIGITAL OUT (COAXIAL)/HDMI OUT
jack.
Selects the type of MPEG audio signal.
PCM
Select this when the player is
connected to an audio
component without a built-in
MPEG decoder. If you play
multi-channel MPEG audio
sound tracks, only the Front (L)
and Front (R) signals will be
output from your two front
speakers.
ON
Normally, select this position.
When you select “ON,” see
for further settings.
OFF
The influence of the digital
circuit upon the analogue circuit
is minimal.
MPEG
Select this when the player is
connected to an audio
component with a built-in
MPEG decoder.
Setting the digital output signal
Switches the method of outputting audio
signals when you connect a component such
as an audio component or MD deck with a
digital input jack.
◆48kHz/96kHz PCM
Selects the sampling frequency of the audio
signal.
Select “DOLBY DIGITAL,” “MPEG,” and
“48kHz/96kHz PCM” after setting
“DIGITAL OUT” to “ON.”
If you connect a component that is
incompatible with the selected audio signal, a
loud noise (or no sound) may be heard from
the speakers, risking damage to your ears or
speakers.
48kHz/16bit The audio signals of video files
are always converted to 48 kHz/
16 bit.
96kHz/24bit All types of signals including
96 kHz/24 bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48 kHz/16 bit.
◆ DOLBY DIGITAL
Selects the type of Dolby Digital signal.
b
• The analogue audio signals from the LINE OUT
(L-AUDIO-R) jacks are not affected by the
“48kHz/96kHz PCM” setting and keep their
original sampling frequency level.
• If the HDMI OUT jack is connected to equipment
not compatible with Dolby Digital, MPEG audio
or 96 kHz/24 bit signals, D-PCM, PCM or
48 kHz/16 bit PCM will be output respectively,
regardless of the settings.
DOLBY
DIGITAL
Select this when the player is
connected to an audio
component with a built-in
Dolby Digital decoder.
D-PCM
Select this when the player is
connected to an audio
component without a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
“DOWNMIX” item in
24
PhotoTV HD Displays a extra highly-detailed
picture when connecting to a
Sony “PhotoTV HD”-
HDMI SETUP
compatible device.
You can adjust items related to the HDMI
connection.
The default settings are underlined.
SD
HD
HD
Displays a standard definition
picture with a black frame.
Displays a high definition
picture with a black frame.
◆ HDMI RESOLUTION
Selects the type of video signals output from
the HDMI OUT jack. When you select
“AUTO (1920×1080p)” (default), the player
outputs video signals of the highest resolution
acceptable for your TV. If the picture is not
clear, natural or to your satisfaction, try
another option that suits the files and your
TV/projector, etc. For details, refer also to the
instruction manual supplied with the TV/
projector, etc.
Displays a high definition
picture without a black frame.
(1920
HD
×
1080i) Displays a high definition
picture with a black frame at
1920×1080 pixels.
(1920
HD
×
1080i) Displays a high definition
picture without a black frame at
1920×1080 pixels.
You cannot select this when “PhotoTV HD”
b
• “(1920×1080i) HD ” and “(1920×1080i) HD”
are effective only when you set “HDMI
RESOLUTION” to “1920×1080i” and “TV
TYPE” to “16:9.”
AUTO
(1920
Normally, select this.
×
1080p)
• If you set to “PhotoTV HD,” “(1920×1080i) HD
” or “(1920×1080i) HD,” effect, rotation and
the zoom function are not available.
1920
×
1080i
Sends 1920×1080i video
signals.
1280
×
720p
Sends 1280×720p video
signals.
• If you want to use effect, rotation, or the zoom
function, set to “SD
,” “HD
,” or “HD.”
• If you set to “PhotoTV HD,” “(1920×1080i) HD
” or “(1920×1080i) HD,” the next image
appears after black mute.
720
576p
×
480/
Sends 720×480/576p video
signals.
• HDMI signal will stop momentarily during
loading or unloading of a USB device.
• When you set to “PhotoTV HD,” the player
changes the video signal output setting in “HDMI
RESOLUTION” to “1920×1080i,” “TV TYPE”
to “16:9,” and “YCBCR/RGB (HDMI)” to
“YCBCR” automatically, although the current
settings are kept.
To reset the setting
If the picture does not appear normal or goes
blank, press [/1 to turn off the player, and
enter “369” using the number buttons on the
remote, then press [/1 to turn on the player
again.
• Set to “SD ” when you want to view photo files
via the analogue video outputs with the HDMI
connection.
b
In the case of “AUTO (1920×1080p),” the player
automatically adjusts the video signals to suit the
TV.
In other cases, the player directly sends the signal
even if TV cannot accept.
◆ YCBCR/RGB (HDMI)
Selects the type of HDMI signal output from
HDMI OUT jack.
◆ JPEG RESOLUTION
You cannot select this when “PhotoTV HD”
Selects the type of JPEG resolution so that
you can enjoy high picture quality via your
HDMI connection.
YCBCR
RGB
Outputs YCBCR signals.
Outputs RGB signals.
You cannot select this when “HDMI
RESOLUTION” is set to “720×480/576p,” or
“TV TYPE” is set to “4:3 LETTER BOX.”
b
• If the playback picture becomes distorted, set to
“RGB.”
,continued
25
• If the HDMI OUT jack is connected to equipment
with a DVI jack, “RGB” signals will be
automatically output even if you select “YCBCR.”
◆ AUDIO (HDMI)
Selects the type of audio signal output from
the HDMI OUT jack.
AUTO
Normally, select this. Outputs
audio signals according to the
“DIGITAL OUT” settings
PCM
Converts Dolby Digital,
MPEG, or 96 kHz/24 bit PCM
signals to 48 kHz/16 bit PCM.
b
A loud noise (or no sound) will be output if you
connect the player to a TV that is not compatible
with DOLBY DIGITAL/MPEG signals and
“AUTO” is selected. In this case, select “PCM.”
◆ CONTROL FOR HDMI
Switches the Control For HDMI setting on or
off.
ON
Allows you to use the
CONTROL FOR HDMI
OFF
Switches this function off.
◆ LANGUAGE FOLLOW
Switches the languages of this player to that
of the current TV OSD language.
You cannot select this when “CONTROL
FOR HDMI” is set to “OFF.”
ON
Switches this function on.
Switches this function off.
OFF
b
• Turn off any display before using this function.
• The OSD language for the player is maintained if
the TV’s language cannot be supported.
26
Operation
Additional Information
The remote does not function.
, The batteries in the remote are weak.
, The remote is not pointed at the remote
sensor on the player.
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
The player does not detect a USB device
connected to the player.
, The USB device is not securely connected
, The USB device or a cable is damaged.
, Compatibility with all encoding/writing
softwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or
interrupted audio or may not play at all.
, This player supports FAT32 format, not
NTFS.
Power
The power does not turn on.
, Check that the mains lead is connected
securely.
Picture and sound
The album/track/file names are not
displayed correctly.
, The player can only display numbers and
alphabet. Other characters are displayed as
There is no picture and no sound.
, Re-connect the connecting cable securely.
, The connecting cables are damaged.
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
, If the colour system of your player does not
match that of your TV (NTSC or PAL),
change the colour system of the player.
First turn off the player by pressing [/1.
Next press DISPLAY, enter “0” using the
number button, and then press [/1.
“ ”.
*
“Data error” appears.
, The video, photo, and music files you want
to play is broken.
The player does not operate properly.
, When static electricity, etc., causes the
player to operate abnormally, unplug the
player.
, Press [/1 to turn off the player, and enter
“369” using the number buttons on the
remote, then press [/1 to turn on the player
again (page 25).
The CONTROL FOR HDMI function does
not work.
, Make sure that the TV’s input is switched to
the USB media player so that the signal
from the player appears on the TV screen,
and “CONTROL FOR HDMI” is set to
There is no picture/picture noise appears
when connected to the HDMI OUT jack.
, Try the following: 1Turn the player off
and on again. 2Turn the connected
equipment off and on again. 3Disconnect
and then connect the HDMI cord again.
‘BRAVIA Sync’ display does not appear.
, Please return to the one screen mode if your
TV is in two screen mode. Then, try again.
5 numbers or letters are displayed.
, The self-diagnosis function was activated.
,continued
27
Self-diagnosis function (when
letters/numbers appear on the
screen)
Notes About Video,
Photo, or Music files
When the self-diagnosis function is activated
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen. In this case, check the
following table.
The player can play the following files:
File Type
File format
Extension
*1*2
DivX
“.avi” or
“.divx”
Video
*1*2*3
MPEG-1
“.mpg” or
“.mpeg”
First three
Cause and/or corrective
characters of action
the service
MPEG-2
(PS)
“.mpg” or
“.mpeg”
*1*2
number
MPEG-4
(simple
profile)
“.mp4” or
“.m4v”
C 31
The USB device is not
*1*2*4
connected correctly.
,Re-connect the USB
device correctly.
*5
Photo
Music
JPEG
“.jpeg” or
“.jpg”
MP3
“.mp3”
“.wma”
“.m4a”
*4
WMA
*4
AAC
LPCM/WAVE “.wav”
1
*
In some cases certain file formats are not
supported on this player.
The player can play video files of size up to 720
(width) × 576 (height)/2 GB.
Only support movie data of cyber shot.
Files with copyright protection (Digital Right
Management) cannot be played.
Photo files that conform to the DCF (Design
rule for Camera File system) image file format.
2
*
3
4
*
*
5
*
The player will play any file in the above
table, even if the file format differs. Playing
such data may generate noise that can result
in speaker damage.
z
• If you add numbers (01, 02, 03, etc.) to the front
order.
• To play a complex hierarchy of folders may take
some time. Create albums with no more than two
hierarchies.
• Set “MEDIA” to “PHOTO (MUSIC)” to repeat
both music and photo files (page 18).
28
b
• Some video, photo, and music files may not play,
depending on the encoding/recording condition.
• To start playback and proceed to the next or
another album may take some time.
• The player cannot play music files in mp3PRO or
WMA Pro format.
• If the playing time of either music or photo is
longer, the longer one continues without sound or
image.
• To display Progressive photo files or photo files
of 3,000,000 pixels or more may take time and the
duration may seem longer than your selected
setting.
• The player will recognize a maximum of 200
albums, regardless of the selected mode. It can
recognize up to 300 music files and 300 photo
files when “PHOTO (MUSIC)” is selected, 600
music files when “MUSIC” is selected, 600 photo
files when “PHOTO (BGM)” is selected, and 600
video files when “VIDEO” is selected.
• The player may not play a combination of two or
more video files.
Specifications
Outputs
(Jack name: Jack type/Output level/Load
impedance)
LINE OUT (AUDIO):
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19 pin-Standard Connector
COMPONENT VIDEO OUT (Y, PB, PR):
Phono jack/Y: 1.0 Vp-p,
P
B, PR: 0.7 Vp-p/75 ohms
LINE OUT (VIDEO):
Phono jack/1.0 Vp-p/75 ohms
USB:
USB jack Type A, maximum current
500 mA (For connecting USB device)
• The player may not play certain video files that
are longer than 3 hours.
General
Power requirements:
DC 6 V (AC adaptor)
Power consumption: 8 W
Dimensions (approx.):
• Depending on the file, normal playback may not
be possible. The picture may be unclear, playback
may not appear smooth, or the sound may skip,
etc. You are recommended to create a file at a
lower bit rate.
145 × 24.5 × 106 mm (width/height/
depth) incl. projecting parts
Mass (approx.): 245 g
• When playing visual data that is not supported by
MPEG-4 format, only sound will be heard.
Operating temperature: 5 °C to 35 °C
Operating humidity: 25 % to 80 %
AC adaptor: 220 – 240 V AC, 50/60 Hz
Supplied accessories
• Audio/video cable (phono plug × 3 y
phono plug × 3) (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
• AC power adaptor (1)
Specifications and design are subject to
change without notice.
29
For customers in Europe
z To find out useful hints, tips and information about Sony products and services
4-157-000-12(1)
Sony Corporation Printed in Malaysia
|